Need to Know About Wooden Blinds

Wood flooring are an increasingly popular window covering choice. They add a classic, timeless look to any home, while also providing privacy and temperature control. Wooden blinds are extremely versatile and come in a variety of colors, textures, and shapes to suit any home’s style. If you’re considering wooden blinds for your windows, this blog post is the perfect guide to get you started. Here, you’ll find all the information you need to know about wooden blinds, including what to look for when shopping, how to install them, and how to maintain them.

How to Install Wooden Blinds

Wooden blinds are an attractive and versatile window covering solution. Installing wooden blinds is a DIY project that any moderately skilled do-it-yourselfer can complete in a few hours.

To install wooden blinds, you will need the following materials: A box of wooden blinds, A cordless drill, a Phillips head screwdriver, Masking tape or painter’s tape, and A pencil.

The first step is to take measurements. To do so, measure from the outside edges of each side of the window, down to just past the center of it. Write this measurement down for later use. Then, go ahead and cut to length any slats you want to trim out before installing them in your window frame. This will depend on how many slats you need and their desired width.

Place these slats on a flat surface, such as a table or countertop, and take one at a time with a clamp or something similar, and position it against the inside edge of one side of your window frame (the top edge should be flush against this edge). Use a pencil or marker to mark where holes are drilled into that side’s wood boards (always drill holes into both sides) and then drill them out with an electric drill or hand

Tips to Increase the life of Wooden blinds

When it comes to increasing the life of wooden blinds, proper care and maintenance are key. Here are some tips that can help you get the most out of your wooden blinds:

1. Avoid exposure to direct sunlight: Sunlight can cause the wood to warp and fade over time. Keep your blinds out of direct sunlight as much as possible.
2. Clean regularly: Dust and dirt can accumulate on the slats, causing the wood to become brittle and worn over time. Regularly cleaning your wooden blinds can help to keep them looking their best for longer.
3. Avoid moisture: Too much moisture can cause the wood to swell and rot, making your blinds less effective. If you’re using blinds in a bathroom or kitchen, make sure to use a dehumidifier to reduce moisture in the air.
4. Choose the right finish: Applying a finish to your blinds can help protect the wood from wear and tear. Look for finishes specifically designed for wooden blinds that are water-resistant and easy to clean.
5. Use blind lifters: Blind lifters are helpful tools that make it easier to open and close your wooden blinds, which helps to reduce wear and tear on the wood.

By following these tips, you can help to extend the life of your wooden blinds and keep them looking great for years to come.